8 in 1 protection package from LION
it contains
1- Transparent nano front sticker
2- Nano front sticker, anti-fingerprint
3- Stand magnet handle
4- Magnet base to hold the mobile phone
5-A circular piece of iron with 3M glue
6-Thermal back sticker
7- Paste to clean the charger and headphone port
8- Transparent protection cover against shocks
9- Camera protection
10-Vibration absorption piece
Installation method:
Installing the front screen
1- First, the screen is completely wiped and cleaned and carefully ensured that it is free of impurities, hairs, etc.
A- The screen is wiped with a wet wipe
B- The screen is wiped with a dry wipe
C- The existing adhesive is used to pass over the screen, and the goal of the adhesive is to completely remove hairs and impurities.
2- Take the front screen out of the mold
3- Weighing it on the mobile screen, and weighing it using the location of the front camera and the location of the speaker facilitates the weighing process.
* If there are impurities after the installation process, you can remove them by opening the place closest to the impurity and removing them using additional adhesive. They can sometimes be removed by pressing on the blemish and pushing it out
* In the event of a large number of impurities, you can wash the screen, clean it, and reinstall it.
Installation of rear thermal protection:
1- First, impurities are removed, if any
2- Remove sticker number one and ensure that the thermal protection remains and is not removed while removing the outer part.
3- Install the protection from the top of the mobile phone and pass over it from the mobile phone bottom with the rectangular piece to ensure that there is no air inside.
4- Remove sticker number two and pass through the rectangular piece from the top of the phone to the bottom to ensure that there is no air inside.
5- Remove the external adhesive
Camera protection installation:
1- Ensure that the place is free of impurities
2- Install camera protection and weight on the lenses.